Myriad Power Chillers

ABSORPTION CHILLERS

Chillers circulate chilled water to transfer heat from air to water. Heat is passed from the water to freon. The freon exits the evaporator as a cold vapor and enters the compressor as a hot vapor. The vapor enters the condenser where heat is transferred from the refrigerant to the water side of the condenser. Then it is circulated to an open cooling tower for removal of heat via evaporation in the cooling tower. Know More

We Carry All Major Brands.
Call for Quote.

CHILLERS

ROBUR GAHP- HR

For any application requiring the use of free supplemental hot water during chiller operation. Chilled water supply temperature down to 37.4 °F and recovered heat capacity of 86,400 BTU/h with hot water up to 176 °F.

Brochure

ROBUR GAHP- AR

Reversible absorption cooling cycle with 126% heating efficiency at nominal conditions. The reversible absorption heat pump is a gas fired unit providing approximately 5 tons of cooling. Chilled water down to 37.4 °F is possible. In the heating mode hot water up to 140 °F is possible providing 120,400 BTU/h nominal output (95,500 BTU/h input). This unit uses outside air for heat rejection in the cooling mode and outside air as a heat source in the heating mode.

ROBUR GAHP- AYF

This model combines the ACF chiller with a Robur copper finned tube boiler. Nominal heating output of 110,900 BTU/h. Maximum leaving hot water supply temperature up to 185 °F. Utilize the flexibility and comfort of year-round chilled water cooling and hot water heating integrated into one outdoor package. No indoor space required for heating equipment and flue venting. Available in a two pipe configuration for either chilled or hot water supply, or four pipe configuration to allow simultaneous chilled and hot water production